ITech IT-E255A, User Manual

Page: 35 / 43

Function and Features
2. Click Create , and create new List steps.
Description of interface parameters:
Parameters Descriptions
USB
Mode The test modes of this step include: QC2, QC3, PE+, PE
+2.0, USBPD and USBPPS
Position It is the defined voltage position when the mode is USB
PD or USB PPS. When the mode is USB PPS, the param-
eter configuration starts from 2. Otherwise, the USB PPS
mode test cannot be executed.
Voltage It is the voltage value set in this step. For voltage setting
range, please refer to Chapter 2.2 Manual testing .
Copyright © Itech Electronic Co., Ltd.
25