ITech IT-E255A, User Manual

Page: 14 / 43

Brief Introduction
No. Description Function description
1 START
•
Short press: Start to change the output voltage
based on setting value.
•
Long press for 3 seconds: Start to change the
output voltage based on setting value, and
save the mode states selected by MODE and
current duration under PE mode. After saving,
“saved” will be displayed. In the next starting,
the quick charger controller will automatically
load the setting value, and the user needs not
to set it again.
2 DOWN Decrease the setting voltage value. Under QC3.0,
PE+2.0 and PD3.0 modes, there are short press
and long press; by pressing and holding the
DOWN button, the user can quickly decrease the
voltage value or current value (only in PPS).
3 UP Increase the setting voltage value. Under QC3.0,
PE+2.0 and PD3.0 modes, there are short press
and long press; by pressing and holding the UP
button, the user can quickly increase the voltage
value or current value (only in PPS).
4 MODE The user can select the protocol supported by the
quick charger controller in order. Select the fast
Copyright © Itech Electronic Co., Ltd.
4