Parameters
Descriptions
OCP: It is valid when the Running Mode of the electronic load is set to
OCP.
Start Current
It is the setting value of start current.
Step Count
It is the total steps.
Step Interval
It is the time interval of each step.
Stop Current
It is the setting value of stop current.
Occur Voltage
It is the OCP voltage value.
Illustration
View the curve graph of this step.
OK
Confirm to add the existing setting as a single step of the
List file.
Cancel
Cancel the step adding operation.
3. Fill in corresponding parameters on the
LIST EDIT
interface, and click
OK
.
The interface displays List steps.
•
Click
button at the front of the step to delete existing step.
•
Double click the step parameters to edit this List step.
4. After editing the List step, click
Write
to write the existing List file to the quick
charger controller. Then, the quick charger controller will run test based on
this List.
5. Click
Start
to run test.
When the List is running, the
Start
button is changed to
Stop
. To stop
test, click
Stop
.
6. Click
Export
to export the List file, and save the List file in the computer in
Excel form.
Copyright © Itech Electronic Co., Ltd.
27
