Itamar Medical WatchPAT 200 Unified Operation Manual Download Page 64

Page: 64 / 82

WatchPAT™200 System

Operation Manual

Action

Comment

rac

elet

tion

Connecting the

Bracelet

Connect the red and white
connectors (other side of the gray
cable) to the red and white snaps on
the bracelet respectively.

Pairing the

WP200 and the
Bracelet:
Site-
Diagnostic
Test

Perform the regular site diagnostic

test (“device test” & “oxi test” as
described in the user manual).

Make sure the bracelet is connected

before starting the test.

After tests passed successfully,

disconnect the bracelet from the
WatchPAT™ device and store them
together.

Note: Once the device testing has

been done with the bracelet
connected – the SPECIFIC bracelet
must be used with the specific
WatchPAT™. NO OTHER
BRACELET WILL WORK WITH
THIS WatchPAT™ device. (A
unique ID of this bracelet is
registered in the WatchPAT™
System.)

Summary of Contents for WatchPAT 200 Unified



















































































Search results

Summary of Contents for WatchPAT 200 Unified

Reviews:

Related manuals for WatchPAT 200 Unified

Brands by name

Popular brands

Itamar Medical WatchPAT 200 Unified, Operation Manual

Search results

Summary of Contents for WatchPAT 200 Unified

Reviews:

Related manuals for WatchPAT 200 Unified

Brands by name

Popular brands