manualshive.com logo in svg

Itamar Medical WatchPAT 200 Unified, Operation Manual

Share
Download
Itamar Medical WatchPAT 200 Unified Operation Manual Download Page 13

 

WatchPAT™200 System

 

5 

Operation Manual 

 

 

 

Notes

 are used to identify an explanation, or to provide additional 

information for purposes of clarification. 

 

Les notes

 sont utilisées pour identifier les explications et pour donner des 

informations supplémentaires dans le but de clarifier. 

1.9  Warnings, Cautions and Notes 

The WatchPAT™200 device is internally powered from a 4.2 V battery. 
The WatchPAT™200 device is portable with continuous operation. 
The WatchPAT™200 device uses BF patient applied parts. 
The WatchPAT™200 device uses UL listed power supply (USA & Canada only). 
The power supply is used in a non-patient environment only. 
The WatchPAT™200 device should only be transported in its original case. 
There are no serviceable parts inside the WatchPAT™200 device. 
Do  not  use  WatchPAT™200  device  for  non-indicated  purpose,  such  as  oximetry  for 
ICU patient monitoring or alarm device. 
Environmental conditions during transportation & storage: See Specifications section. 
Environmental conditions during operation: See Specifications section. 
 
Sleep professionals (other than patients) using the WatchPAT™200 system should 
read the Operation Manual. 

 

 

Summary of Contents for WatchPAT 200 Unified



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands