iSMA iSMA-B-4I4O-H User Manual Download

Page: 47 / 73

MINI and MIX Series I/O modules/Modbus

version 1.3

www.gc5.pl

Page 47 / 73

Figure 38 Digital Outputs page of MIX38-IP

Digital Outputs table has the following fields:

•

State (Read & Write), actual state of digital output.

•

Default State (Read & Write), output state after power up and watchdog.

•

Watchdog (Read & Write),device watchdog value in seconds.

WARNING! To save changes please use “Submit” button

Analog Outputs

This page allows to enter configuration parameters and shows actual value of Analog
Outputs. To open this page please navigate to Local IO tab and choose Analog Outputs from
submenu.

Figure 39 Analog Outputs page of 4U4A-H-IP

Analog Outputs table has the following fields:

•

Value (Read & Write), actual value of analog output in millivolts [mV].

•

Type (Read & Write), analog output working mode voltage / PWM.

•

Default Value (Read & Write). default output value after power up and watchdog.

•

Digital Output (Read & Write). output status flag for DO mode.

•

Default Digital Output (Read & Write). default output status for DO mode.

•

Watchdog (Read & Write), device watchdog value in seconds.

Summary of Contents for iSMA-B-4I4O-H










































































Search results

Summary of Contents for iSMA-B-4I4O-H

Reviews:

Related manuals for iSMA-B-4I4O-H

Brands by name

Popular brands

iSMA iSMA-B-4I4O-H, User Manual

Search results

Summary of Contents for iSMA-B-4I4O-H

Reviews:

Related manuals for iSMA-B-4I4O-H

Brands by name

Popular brands