iSMA iSMA-B-4I4O-H User Manual Download

Page: 48 / 73

MINI and MIX Series I/O modules/Modbus

version 1.3

www.gc5.pl

Page 48 / 73

•

Hand State Output (Read Only, MINI series only), manual overrides potentiometer
status

WARNING! To save changes please use “Submit” button

4.4

RS485 Configuration

This page allow to enter configuration parameters and show information of controllers
RS485 port.

Figure 40 RS485 configuration page

This page allows to set parameters such as:

•

Baud rate (Read Only ), RS485 baud rate from 2400 up to 115200.

•

Modbus Config (Read Only ), Modbus Protocol Type- RTU or ASCII.

•

Stop Bits (Read & Write), number of stop bits (1 or 2).

•

Data Bits (Read & Write), number of data bits transmitted in a single byte

(7 or 8).

•

Parity Bits (Read & Write), transmission protection as a parity bit added before stop bit
(bits).

•

RS485 Biasing Resistors , biasing resistors activation only for MINI modules with a
hardware version >= 2.0 (option unavailable in MIX modules)

•

Received Frames (Read Only), number of received frames.

•

Transmitted Frames (Read Only), number of transmitted frames.

•

Error Frames (Read Only), number of error frames.

WARNING! To save changes please use “Submit” button

Summary of Contents for iSMA-B-4I4O-H










































































Search results

Summary of Contents for iSMA-B-4I4O-H

Reviews:

Related manuals for iSMA-B-4I4O-H

Brands by name

Popular brands

iSMA iSMA-B-4I4O-H, User Manual

Search results

Summary of Contents for iSMA-B-4I4O-H

Reviews:

Related manuals for iSMA-B-4I4O-H

Brands by name

Popular brands