Iseki SXG19H-UE, Operation Manual

Page: 16 / 96

I. FOR SAFE OPERATION
15
a. Read the manual thoroughly.
b. Shut off the engine and remove the starter
key before servicing or repairing the
machine.
c. The negative terminal of the battery should
be disconnected before servicing or repair-
ing the machine.
d. When leaving the machine,
Apply the parking brakes,
Shut off the engine, and
Remove the engine key.
e. Risk of injury
Keep all safety devices such as guards,
safety switches, etc in place and working
properly.
f. Risk of injury
Remove objects from around the machine
that could be thrown by blades and keep
people away from the machine before start-
ing the machine.
g. Risk of running over a person
Watch behind before reversing the machine
and keep people from around the machine
before starting the machine.
h. Risk of running over a person
Don't allow any other person to ride on a
wheel fender or any place other than the dri
ver's seat of the machine.
i. Risk of overturning or crushing
Do not operate the machine in any place
where it could slip or tip over.
j. Rist of overtuning or crushing
Avoid operating the machine on a slope of
over 12˚.
(2) Battery label
(Code No. 1705-904-002-0)
a. Avoid sparks and flames.
b. Wear a eye protection gear.
c. Keep battery out of reach of children.
d. Beware of sulphuric acid.
e. Beware of explosion.
f. Read the manual thoroughly.
Handle the battery carefully:
- Improper handling of the battery may lead to
explosion. Never short the poles. Keep away
from sparks or flames. When charging or
using, provide sufficient ventilation. Watch
out when using booster cables.
- Battery electrolyte(sulphuric acid) may cause
blindness or burns. Avoid allowing electrolyte
to contact eyes, skin or clothing. In the event
of an accident flush area immediately with
plenty of water. If acid gets into the eyes,
rinse with plenty of water any get medical
attention.
- Never use the battery with the electrolyte
level below the "LOWER" limit, or it may
explode.
- Never replenish exceeding the "UPPER"
limit or the electrolyte may spill out.
(3) Fuel label
(Code No. 1705-904-001-0)
Use diesel fuel only. No open flame.
(4) Belt caution label
(5) (Code No. 8595-901-006-0)
(6)
Stay clear of the belt while it is running.
(7) Hot-part caution label
(Code No. 8595-901-007-0)
Stay clear of the heated parts while they are
hot.