Iseki SXG19H-UE, Operation Manual

Page: 68 / 96

II. ATTACHING AND DETACHING MOWER DECK
69
d. Depress the lower chute(2) and keep it down
with ring clip(4).
e. Place the mower deck underneath the lawn
mower.
f. Insert the discharge cover of mower deck into
chute of lawn mower.
g. Move the lift lever(1) forward and depress rear
link(5).
h. Install the rear link(5) into mower deck with pin.
i. Install drive shaft(6) into lawn mower.
J. Install the front link(7) into lawn mower and
mower deck.
k. Start the engine and move the lift lever backward
to raise the mower deck.
l. Set the gauge wheels(3) of the mower deck
straightly.
M.Return the lower chute (2) by removing the ring
clip.
Important:
• "When installing and removing the mower deck,
turn clockwise(-) the high adjust dial(9) fully to
lower the mower deck."
• "After installing the mower deck, be sure that the
ground clearance of the bottom surface of the
mower deck is 150mm."
• "When the mower deck is leaning to forward or
backward, adjust length of tht front link(7)."
In case of leaning to forward:
Make length of tht front link(7) shorter
In case of leaning to backward :
Make length of tht front link(7) longer
2. DETACHING THE MOWER DECK
Detach the mower deck in reverse order of attach-
ing: Remove the drive shaft first and then the
mower deck.
Caution:
Be sure to disconnect the universal joint on the
PTO shaft of the lawn mower.
Important:
Be sure to keep the removed parts.