Iseki SXG19H-UE, Operation Manual

Page: 94 / 96

•
Collector does not move.
Troubles
Max. 15 m/s 2
Max. 5 m/s 2
SXG22
Max. 15 m/s 2
Max. 5 m/s 2
105
90
2865
1976
SXG22
＋
SCMA54
＋ SBC550X-H
SXG22
＋
SCMA54
＋ SBC550X-L
SXG22
＋
SCMA48
＋ SBC550X-H
SXG22
＋
SCMA48
＋ SBC550X-L
SXG19
＋
SCMA48
＋ SBC550X-H
SXG19
＋
SCMA48
＋ SBC550X-L
105
90
2865
1976
105
90
2865
2185
105
90
2865
2185
105
90
2865
2185
105
90
2865
2185
•
Excessive noise and
vibration
•
Filling rate of
container is poor
VI. TROUBLESHOOTING
95
VI. TROUBLESHOOTING
Presumable causes
•
Front PTO belts are worn down
•
Tension of belt is poor
•
Net of container is clooged
•
Shooter is clooged with grass
•
Mower deck is clooged with grass
•
Location of cleaning plate is poor
•
Too low engine speed
•
Engine power is down
•
Grass is too moist
•
Too tall grass
•
Too fast traveling
•
Too dense grass
•
Adjustment of grass limit sensor is poor
•
Loose bolts and nuts
•
Fulcrum of collector link is poor
•
Cramp of hydraulic hose is loosen
•
Short of grease with collector link
•
Short of grease with collector link
•
Install hydraulic hose by mistake
•
Too low engine speed
•
Defective hydraulic system
Remedies
•
Replace belts with new one
•
Check belt and correct it
•
Clean
•
Clear the clogged grass
•
Clear the clogged grass
•
Set the cleaning plate properly
•
Mow at full throttle (
r
)
•
Check engine oil, air cleaner, coolant
and clean radiator net, intake net
•
Wait until grass becomes dry
•
Try to mow two steps
•
Slow down sufficiently
•
Try to mow two steps
•
Adjust it properly
•
Retighten them properly
•
Check and consult your dealers as
necessary
•
Cramp it properly
•
Inject grease with collector link
•
Inject grease with collector link
•
Check and correct
•
Raise engine speed
•
Consult your dealers
NOISE:
Sound power level db(A)
Sound power level at operator's ear db(A)
Weighted root mean square acceleration less than value
to which the arms are subjected
Weighted root mean square acceleration less than value
to which the body is subjected
Speed of rotation of the engine
Test code
Speed of rotation Engine min -1 (rpm)
Blade min -1 (rpm)
Test code
NOISE & VIBRATION
2865 min -1 (rpm)
SXG19
2865 min -1 (rpm)
ISO 5349
EEC 84/538
VIBRATION: