Iseki SXG19H-UE, Operation Manual

Page: 52 / 96

VIII. MAINTENANCE
51
(1) Fuse box
26. INSPECTION OF FUSES AND WIRING
(UGE TYPE)
The fuse box is located in the ritht-hamd side
inside the engine room.
(1) Fuse box
Caution:
• The 20A fuse in fuse box is not a spars fuse. It is
installed to provide power to the electric system
of an implement other than the mower Never use
it in place of the other fuses.
• Never replace blown fuses or slow-blow fuse
with wire.
Important:
• When a fuse or a slow-blow fuse is blown, be sure
to locate the trouble and correct it. When the
couse is not clear, consult your dealers.
• Be sure to use specified fuses. Larger-capacity
fuses will cause burn-out of electric accessories
and wiring.
• When a slow-blow fuse has been burnt out, use
genuine ISEKI slow-blow fuse (1614-690-202-
00).
The alternator and the starter motor have their
own slow-blow fuse.
Warning:
• Damaged wire covers should be mended with
insulation tape immediately.
Caution:
• The wiring of the lawn mower should be checked
every year at your dealers to avoid electrical
fires.
• Grass and dust around the battery, wiring, muf-
fler and engine ahould be removed. Otherwise
they may catch fire.
Important:
• When a wire harness has come off its clamp, it
should be re-clamped immediately.
27. MAINTENANCE OF HYDRAULIC SYSTEM
PARTS
When hydraulic system parts such as the HST
unit, power-steering unit, hydraulic pump, control
valve, hydraulic cylinder, piping, etc. are required
Fuse
capacity
Application
Fuse
capacity
Application
20A Head light 20A
Small lamp (L&R),
Hazard lamp,
Number plate lamp
20A High beam 20A Tuming Signal lamp
10A Small lamp (left) 20A brake lamp
10A Small lamp (right) 20A Option
10A
Hazard lamp
Number plate lamp
10A Engine stop relay
3A Fuel pump 10A Monitor lamp
Fuse capacity Application
3A Fuel pump
10A Solenoids
10A Lamps and relays
20A
20A
Head light
Option