SXG
46
VIII. MAINTENANCE
2. ENGINE OIL LEVEL
a. Pull out the engine oil level gauge (dipstick) which is
located on the right sidewall of the engine.
b. Wipe the end of the dipstick with dry cloth.
c. Then insert it into the engine properly.
d. Pull it again. Make sure that the oil level is between
the upper and lower limits.
(1) Engine (2) Oil level gauge
(1) Oil level gauge (2) Upper limit (3) Lower limit
(1) Engine (2) Engine oil filler
What are explained hereunder are the maintenance
items which you can cope with. When you encounter
any abnormality or trouble which is not mentioned in this
manual, please ask your dealer for service.
WARNING: When lubricating or servicing
the lawn mower:
• Place it on level, hard ground.
• Stop the engine and remove key from the
starter switch.
• Apply the parking brake securely. (GE Type)
• Apply the parking lock securely. (E Type)
• Push down the front half (
d
) of the lift lever
and lower the mower to the ground.
• Set the PTO lever to the OFF position ( ).
• Service the lawn mower after the engine
has cooled down sufficiently. With these
items in mind, confirm the safety condi-
tions for maintenance operation without fail
ahead of time.
1. ENGINE HOOD
a. Pull the hood lock to arrowed direction, and open with
supporting side hood by another hand.
(1) Hood
(2) Hood lock
1
2
3
2
1
2
1
Summary of Contents for SBC550X
Page 71: ...SXG 70 ...
Page 72: ...XI ELECTRIC WIRING 71 XI ELECTRIC WIRING E TYPE ...
Page 73: ...72 SXG GE TYPE ...
Page 103: ...SBC600XH SBC550XL 102 ...
