Iseki SBC550X, Operation Manual

Page: 39 / 105

SXG
38
2. FENDER (WING) PANEL
(1) Lift lever (4) Height adjustment dial
(2) Parking brake lever (GE TYPE) (5) Collector lift lever
(3) Cleaning lever
(6) Collector dump lever
2.1. LIFT LEVER
With this lever, the lift link is raised and lowered:
in this position, the lift link is lowered.
in this position, the lift link is raised.
CAUTION: When servicing or leaving the
lawn mower, be sure to lower the mower
deck to the ground.
2.2. PARKING BRAKE LEVER (GE TYPE)
Use this lever when parking the lawn mower. Pull up
the lever, and the parking brake is applied. Push in the
top button and lower the lever to disengage the brake.
IMPORTANT : Never start travelling with the parking
brake applied, or the brake performance
will deteriorate soon or, even worse, the
brake system could break down.
The parking lamp illuminates while the starter switch is in
the ON ( ) position and parking lever is pulled upward.
Relieve the parking lever before starting the lawn mow-
er and make sure that the parking lamp is turned off.
CAUTION: When leaving the lawn mower, be
sure to apply the parking brake.
1.10. COMBINATION SWITCH (GE TYPE)
The combination switch incorporates the master light-
ing switch, turning signal switch and horn switch.
(1) Master lighting switch
R
: OFF
Ò
: low beam headlamps
l
: high beam headlamps
(2) Turn signal switch
: turn signal right
: turn signal left
(3) Horn switch
1.11. HAZARD LIGHT SWITCH (GE TYPE)
Ó
: The monitor lamp and turn signal lamps
blinks while hazard light switch is in the ON
position.
4
1
2
3
5
6
2 3 1