Iseki SBC550FH, Operation Manual

Page: 142 / 152

CHAPTER 3. COLLECTOR OPERATION
141
1. BEFORE OPERATION
CAUTION:
・
Become familiar with how to operate
the lawn mower and understand safety
instructions by reading this manual
carefully.
・
Make sure that all safety covers and
guards are installed in position.
・
Before operating the collector, be sure to
confirm that collector move up and down
smoothly.
・
When operating the collector, be sure to
confirm that hydraulic hose is not pulled
and interfered.
2. ADJUSTING THE GRASS LIMIT SENSOR
(1) adjuster bolt
(2) adjustment position label
a. Filler rate of container is changed with adjusting the
adjuster bolt(1).
b. Check the buzzer of grass limit sensor. Set the
starter switch ON position (Don't start engine) and
set the PTO lever on. Check that buzzer sounds by
pushing the sensor plate(3).
CAUTION:
After checking the buzzer, be sure to turn
starter switch and PTO lever off.
CHAPTER 3. COLLECTOR OPERATION
8
6
6
4
-9
0
5
-0
0
5
-0
1
2
3
4
5
6
7
1 2 3
3. INSPECTION BEFORE OPERATION
・
Before operating, inspect the points as follows.
(1) safety switch
The safety switch of the collector is designed to prevent
the blower from rotating with lifted container.
In condition that no stones or any objects and also on
the concrete ground, refer to the items mentioned below.
a. Apply the parking brake to the ON position and start
the engine.
b. Lift up or dump the collector a little.
c.
Shift the center PTO to the ON position with the
engine stopping.
d. Be sure to confirm that starter motor doesn’t start
with starting the engine.
CAUTION:
After checking the safety switch, be sure to
turn starter switch and PTO lever off.
1