Iseki SBC550FH, Operation Manual

Page: 141 / 152

SFH220,240
140
WARNING:
When attaching or detaching the collector
to the lawn mower:
・
Place the lawn mower on level, hard
ground.
・
Apply the parking brake securely.
・
Shift all PTO Ievers to the STOP (
N
)
position.
1. DETACHING THE HIGH DUMP COLLECTOR
(1) Lift port (2) Dump port
a. Set the collector 50mm upper position by using lift
and dump lever.
b. Put stoppers on three sides of the collector.
c. Separate the connection of grass limit sensor and
safety switch wiring, it is located in left hand side on
lawn mower.
d. Remove the hose from lift and dump port of valve
connecting with collector.
After removing the hose, cover the port with a plug
on four places.
CAUTION:
Separate the connection of grass limit
sensor and safety switch wiring, it is located
in left hand side on lawn mower.
CHAPTER 2. DETACHING AND ATTACHING COLLECTOR
㧼 㧮
㧮 㧟
㧭 㧟
㧮 㧞
㧭 㧞 㧭 㧝
㧼
㨀
2
1
(1) stand (LH)
(2) stand (RH)
(3) stand (Rear)
e. Loosen the both right and left connecting bolts of
the lower frame and rear frame of the lawn mower.
f. Make sure that collector is perfectly detached from
the lawn mower.
Release the parking brake and move the lawn mower to
frontward and detach it from the collector.
g. Shift the parking brake to the ON position.
2. ATTACHING THE HIGH DUMP COLLECTOR
Attach the collector in reverse order of the detaching
operation
IMPORTANT: Be sure to keep the removed parts.
DANGER: Use a strong and stable stand.
1
3
2