iES26G Series User’s Manual
iS5 Communications Inc.
66
5.3
Commands Set List — Port Commands Set
Commands
Level
Description
Example
interface fastEthernet
[Portid]
G
Choose the port for modification.
switch(config)#interface
fastEthernet 2
duplex
[full | half]
I
Use the duplex configuration
command to specify the duplex mode
of operation for Fast Ethernet.
switch(config)#interface
fastEthernet
2switch(config-if)#duplex
full
speed
[10|100|1000|a
uto]
I
Use the speed configuration command
to specify the speed mode of
operation for Fast Ethernet, the speed
can’t be set to 1000 if the port isn’t a
giga port.
switch(config)#interface
fastEthernet
2switch(config-if)#speed
100
flowcontrol mode
[Symmetric|Asymmetric]
I
Use the flowcontrol configuration
command on Ethernet ports to control
traffic rates during congestion.
switch(config)#interface
fastEthernet 2
switch(config-
if)#flowcontrol mode
Asymmetric
no flowcontrol
I
Disable flow control of interface
switch(config-if)#no
flowcontrol
security enable
I
Enable security of interface
switch(config)#interface
fastEthernet 2
switch(config-if)#security
enable
no security
I
Disable security of interface
switch(config)#interface
fastEthernet
2switch(config-if)#no
security
bandwidth type all
I
Set interface ingress limit frame type to
“accept all frame”
switch(config)#interface
fastEthernet
2switch(config-
if)#bandwidth type all
bandwidth type broadcast-
multicast-flooded-unicast
I
Set interface ingress limit frame type to
“accept broadcast, multicast, and
flooded unicast frame”
switch(config)#interface
fastEthernet
2switch(config-
if)#bandwidth type
broadcast-multicast-
flooded-unicast
