iES26G Series User’s Manual
iS5 Communications Inc.
60
Command Line Interface Management
5.1
About CLI Management
Besides WEB-based management, the iES26G also supports CLI management. The user can use the
console or telnet to manage the switch.
CLI management via RS-232 Serial Console (9600, 8, none, 1, none)
Use an RJ45 to DB9-F cable to connect to the switch’s console and to a local PC’s COM
port.
Follow the steps below to access the console via the RS-232 serial cable.
1.
Start Tara Term application.
2.
Under
Setup
select
Serial Port
.
3.
Select the COM Port used to connect to the Console Port. Set the rest of the properties to:
9600 for Baud rate, 8 for Data bits, None for Parity, 1 for Stop bits and none for Flow control,
then press “OK”.
