iES26G Series User’s Manual
iS5 Communications Inc.
34
RSTP - Port setting
RSTP Port Setting interface
The RSTP algorithm results are shown on this table.
Label
Description
Path Cost (1-200000000)
The Path Cost to the other bridge from the transmitting bridge at a
specified port. Enter a number 1 to 200000000.
Port Priority (0-240)
Enter which port should be blocked by setting the priority on the
LAN. Enter a number between 0 and 240. The value of priority
must be a multiple of 16.
Admin P2P
Some of the rapid state transactions that are possible within RSTP
are dependent upon whether the port concerned can only be
connected to one other bridge (i.e., It is served by a point-to-point
LAN segment), or, it can be connected to two or more bridges (i.e.,
It is served by a shared medium LAN segment). This function allows
the P2P status of the link to be manipulated administratively. True
means P2P is enabled. False means P2P is disabled.
Admin Edge
Admin Edge is the port which is directly connected to end
stations. It cannot create a bridging loop on the network. To
configure the port as an edge port, set the port to “
True
”.
Admin Non STP
This port includes the STP mathematic calculation. The STP
algorithm is included for a “
True
” setting. The STP algorithm is not
included for a “
False
” setting.
Apply
Click “
Apply
” to set the configurations.
Help
Show help file.
