iES26G Series User’s Manual
iS5 Communications Inc.
57
DropFwdLkup
Number of unicast packets dropped after forwarding table
lookup.
DropIn
Number of packets received when damaged in physical.
TxMcst
Number of good multicast packets transmitted.
TxPause
Number of pause packets transmitted.
RxPause
Number of pause packets received.
TxUnderrun
Number of packets transmitted when damaged in physical.
Clear
Clear all counters.
Help
Show help file.
4.1.13.4
Port Monitoring
The Port monitoring function supports TX (egress) only, RX (ingress) only, and TX/RX
monitoring. TX monitoring sends any data that egresses out checked TX source ports to a
selected TX destination port as well. RX monitoring sends any data that ingress in checked RX
source ports out to a selected RX destination port as well as sending the frame where it
normally would have gone. Note: keep all source ports unchecked to disable port
monitoring.
Port Monitoring Interface
The following table describes the labels for the Port Monitoring screen.
Label
Description
Mode
Select Disable, RX, TX or Both RX/TX
Analysis Port
There can only be one port that can be selected to be the Analysis
port for monitoring both RX and TX traffic from the source port.
Monitored Port
The port the user wants to monitor. The monitored port traffic
will be copied to the Analysis port.
Apply
Click “
Apply
” to set the configurations.
Help
Show help file.
