iES26G Series User’s Manual
iS5 Communications Inc.
41
The following table describes the labels for the Qos Policy screen.
Label
Description
QoS Mode
Highest: SecHigh: SecLow: Lowest = 8:4:2:1
The output queues will follow an 8:4:2:1 ratio to transmit
packets from the highest to lowest queue. For example: 8 high
queue packets, 4 middle queue packets, and 2 low queue
packets. The lowest queue packet is transmitted in one turn.
Highest: SecHigh: SecLow: Lowest = 15:7:3:1
The same as 8:4:2:1, only a different ratio.
Highest: SecHigh: SecLow: Lowest = 15:10:5:1
The same as 8:4:2:1, only a different ratio.
High Empty Then Low:
The packets in the higher queue will be transmitted first until
the higher queue is empty.
802.1p Priority
Configure each priority level (0-7). There are 4 levels: Highest,
SecHigh, SecLow, and Lowest
.
Port Base Priority
The following table describes the labels for the Port Base Priority screen.
Label
Description
Port base Priority
Assign each port a value from 0 to 7. The value should be according
to the 802.1p priority queues.
Help
Show help file.
Apply
Click “
Apply
” to set the configurations.
