iES26GF
User’s
Manual
UM-iES26GF-1.2.3-EN.docx
Pages 144 of 169
5.12
Factory Defaults
You can reset the configuration of the stack switch on this page. The IP configuration and/or
User/Password are retained only if the respective boxes are checked when the switch is restored to
factory defaults.
Figure 140 - Factory Defaults
The following table describes the labels for the
Factory Defaults
screen.
Label
Description
Yes
Click
Yes
to reset the configuration to factory defaults.
No
Click
No
to return to the
System Information
page without resetting.
5.13
System Reboot
You can reset the stack switch on this page. After reset, the system will boot normally as if you have
powered on the devices.
Figure 141 - System Reboot interface
The following table describes the labels for the
System Reboot
screen
Label
Description
Yes
Click
Yes
to reset the configuration to factory defaults.
No
Click
No
to return to the
System Information
page without resetting.
To reset the iES26G switch to the default configuration, click
Reset
and all configurations will be
reset to their default value.
You can select “
Keep current IP address setting
” and “
Keep current username & password
” to
prevent from changing IP and username and password to the default.
