iES26GF
User’s
Manual
UM-iES26GF-1.2.3-EN.docx
Pages 94 of 169
DSCP Translation
This page allows you to configure basic QoS DSCP translation settings for all switches. DSCP translation
can be done in
Ingress
or
Egress
.
Figure 99 - DSCP Translation interface
The following table describes the labels for the
DSCP Translation
screen.
Label
Description
DSCP
Maximum number of supported DSCP values is 64 and valid
DSCP values range is from 0 to 63.
Ingress
Ingress DSCP can be first translated to new DSCP before using the DSCP
for QoS class and DPL map.
There are two configuration parameters for DSCP Translation -
Translate:
DSCP can be translated to any of (0-63) DSCP values.
Choose one of them from the drop-down list.
Classify:
check to enable
Ingress
classification
Egress
There are the following configurable parameters for Egress side -
1. Remap DP0 Controls the remapping for frames with DP level 0.
2. Remap DP1 Controls the remapping for frames with DP level 1.
Remap DP0:
Select the DSCP value from the drop-down list. DSCP
value ranges from 0 to 63.
Remap DP1:
Select the DSCP value from the drop-down list. DSCP
value ranges from 0 to 63.
Save
Click
Save
to save changes.
Reset
Click
Reset
to undo any changes made locally and revert to previously
saved values.
