iES26GF
User’s
Manual
UM-iES26GF-1.2.3-EN.docx
Pages 104 of 169
5.9
Security
Remote Control Security Configurations
Remote Control Security allows you to limit remote access to the management interface. When
enabled, client requests which are not allowed will be rejected.
Figure 109 - Remote Control Security Configuration interface
The following table describes the labels for the
Remote Control Security Configuration
screen
Label
Description
Port
Port number of the remote client
IP
IP address of the remote client.
0.0.0.0
means any IP.
Web
Enables management via a Web interface
Telnet
Enables management via a Telnet interface
SNMP
Enables management via a SNMP interface
Delete
Check to delete entries
Save
Click
Save
to save changes.
Reset
Click
Reset
to undo any changes made locally and revert to previously
saved values.
Device Binding
This page provides device binding configurations. Device binding is a powerful way to monitor
devices and network security.
Configuration
Figure 110 - Device Binding interface
