iES26GF
User’s
Manual
UM-iES26GF-1.2.3-EN.docx
Pages 95 of 169
DSCP Classification
This page allows you to configure the mapping of QoS class to DSCP value.
Figure 100 - DSCP Classification interface
The following table describes the labels for the
DSCP Classification
screen.
Label
Description
QoS Class
Actual QoS class
DPL
Drop Precedence Level. For every QoS Class, there is a row with DPL=0
and another one with DPL=1.
DSCP
Select the classified DSCP value (0-63) from the drop-down list.
Save
Click
Save
to save changes.
Reset
Click
Reset
to undo any changes made locally and revert to previously
saved values.
QoS Control List
This page shows the QoS Control List (
QCL
), which is made up of the
QCE
s. Each row describes a
QCE that is defined. The maximum number of QCEs is 256 on each switch.
Click on the lowest plus sign to add a new QCE to the list.
Figure 101 - QoS Control List Configuration interface
To see the QCE Configuration dialog box, click on the + sign (marked by a rectangle outlined in red)
