iES26GF
User’s
Manual
UM-iES26GF-1.2.3-EN.docx
Pages 97 of 169
The following table describes the labels for the
QCE Configuration
screen.
Label
Description
Port Members
Check to include the port in the QCL entry. By default, all ports are included.
Key Parameters
Key configurations include:
Tag
: value of tag; it can be
Any
,
Untag,
or
Tag
.
VID
: valid value of VLAN ID, can be any value from 1 to 4095
Any
: user can
enter either a
specific value
or a
range
of VIDs.
PCP
: Priority Code Point, can be specific numbers (
0, 1, 2, 3, 4, 5, 6,
7
), a range (
0-1, 2-3, 4-5, 6-7, 0-3, 4-7
) or
Any
DEI
: Drop Eligible Indicator, can be
0,
1
or
Any
SMAC
: Source MAC Address, can be
specific
(xx-xx-xx, 24 MS bits OUI) or
Any
DMAC Type
: Destination MAC type, can be
unicast
(
UC
),
multicast
(
MC
),
broadcast
(
BC
) or
Any
Frame Type can be
Any Ethernet LLC SNAP IPv4 or IPv6
Note: all frame types are explained below.
Any
Allow all types of frames
Ethernet
Valid Ethernet values can range from 0x600 to 0xFFFF or Any' but excluding
0x800(IPv4) and 0x86DD(IPv6). The default value is
Any
.
LLC
SSAP Address
: valid SSAP (Source Service Access Point) values can range
from 0x00 to 0xFF or Any. The default value is
Any
.
DSAP Address
: valid DSAP (Destination Service Access Point) values can
range from 0x00 to 0xFF or Any. The default value is Any.
Control
Valid Control
: valid values can range from 0x00 to 0xFF or
Any
. The default value is
Any
.
SNAP
PID
: valid PID (a.k.a. Ethernet type); its values can range from
0x00
to
0xFFFF
or
Any
. The default value is
Any
.
IPv4
Protocol
IP Protocol Number: (0-255, TCP or UDP) or Any
Source IP
: specific Source IP address in value/mask format or Any. IP and
mask are in the format of x.y.z.w, where x, y, z, and w are decimal numbers
between 0 and 255. When the mask is converted to a 32-bit binary string and
read from left to right, all bits following the first zero must also be zero.
IP Fragmen
t: Ipv4 frame fragmented options include
yes, no,
and
any.
DSCP
(Differentiated Code Point): can be a specific value, a range, or
Any. DSCP values are in the range 0-63 including BE, CS1-CS7, EF
or AF11-AF43.
IPv6
Protocol IP protocol number
: Other (0-255), TCP, UDP, or Any
Source IP IPv6 source address
: (a.b.c.d) or Any, 32 LS bits
DSCP (Differentiated Code Point)
: can be a specific value, a range, or Any.
DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43.
Action Parameters
Class
QoS class: (0-7) or Default
Valid
Drop Precedence Level
value can be (0-3) or Default.
Valid DSCP
value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) or
Default. Default means that the default classified value is not modified by this
QCE.
