Assembly guide for EASY ROOF EVOLUTION L-1
In
fo
rm
at
io
n
et
v
is
u
el
s
n
o
n
c
o
n
tr
ac
tu
el
s.
S
o
u
s
rés
er
ve
d
e
m
o
d
if
ic
at
io
n
s
tec
h
n
iq
u
es
s
an
s
p
réavi
s.
This document is the property of IRFTS. It shall not be reproduced or shared with third parties without IRFTS agreement
Annex n° 6
8. Assembly of the side glazing stops
a) Position the side glazing stops
b) Screw in place with two CHC M6 x 30 (11) or CHC M6 x 40 (10) screws depending on the thickness of
the PV module (3 screws for 6 bracket assembly)
The position of the modules must comply to the requirements in the instructions page 52
3 mm
Clamping
torque
8.8 Nm
Model “L-1” 60 Cells 6” Portrait
83
Assembly with glazing stops
9. Blanking cover assembly
a) Position the blanking covers over the gap between the glazing stops
b) Tilt them so as to be able to insert the clamping nut under the deflector
(Section)
c) Screw and block in place the deflector kit screws in compliance with the instructions on page 79
Blanking covers see page 8
