Assembly guide for EASY ROOF EVOLUTION L-1
In
fo
rm
at
io
n
et
v
is
u
el
s
n
o
n
c
o
n
tr
ac
tu
el
s.
S
o
u
s
rés
er
ve
d
e
m
o
d
if
ic
at
io
n
s
tec
h
n
iq
u
es
s
an
s
p
réavi
s.
This document is the property of IRFTS. It shall not be reproduced or shared with third parties without IRFTS agreement
Model “L-1” 60 Cells 6” Portrait
Installation of the EASY-ROOF system
1°)Fix one end of the mounting
tool (13) on the middle bracket of the same frame using a screw CHc M6
(10 or 11).
Screw
some threads only.
2°) Position an end bracket (8) in the opening on the frame.
3°) Fix
the other end of the mouting
tool (13) on the end bracket (8) using a screw CHc M6 (10 or 11).
Screw
some threads only.
4°) Align the end bracket (8) with the mounting
tool (13).
5°) Screw
the end bracket (8) with screws 6x40 STAINLESS (9).
6°) Remove the mouniting
tool (13).
7°) Carry out the pose of all other end bracket (8) on the left side of the PV field by repeating the
operations from 1 to 6.
12.4.5)
51
12.5)
Installation of the PV modules
The PV connectors are fixed and secured in a dry zone on the top of the support battens (mandatory for
the EASY ROOF EVOLUTION system). Moreover they must not touch nor interfere with the breather
membrane situated underneath.
