Assembly guide for EASY ROOF EVOLUTION L-1
In
fo
rm
at
io
n
et
v
is
u
el
s
n
o
n
c
o
n
tr
ac
tu
el
s.
S
o
u
s
rés
er
ve
d
e
m
o
d
if
ic
at
io
n
s
tec
h
n
iq
u
es
s
an
s
p
réavi
s.
This document is the property of IRFTS. It shall not be reproduced or shared with third parties without IRFTS agreement
8)
13
Parts to be prepared before assembly of the kit
2°) Middle clamp preparation.
1°) Preparation of the frames
1°) Remove the 6 module centering
wedge
2°) Remove the frieze support
3°) For an installation with 6 fixings per module, cut out and remove the two plugs in the centre of the frame
.
4°) For PV modules with a central reinforcement follow the dividing line to remove the reinforcement
channel.
(For this type of module check the compatibility list on www.irfts.com)
Module Width ≤ 985
986 ≤ Module Width ≤ 994
995 ≤ Module Width ≤ 1001
Pre
mount the module wedge in the slides of each middle clamp (5).
Select the model of module centering
wedge according to the module width.
For a module width < to 992 mm, use imperatively large clamp.
If module width = to 992 mm : normal clamp or large clamp. If module width > 992 mm normal clamp.
1
3
2
4
Model “L-1” 60 Cells 6” Portrait
