Assembly guide for EASY ROOF EVOLUTION L-1
In
fo
rm
at
io
n
et
v
is
u
el
s
n
o
n
c
o
n
tr
ac
tu
el
s.
S
o
u
s
rés
er
ve
d
e
m
o
d
if
ic
at
io
n
s
tec
h
n
iq
u
es
s
an
s
p
réavi
s.
This document is the property of IRFTS. It shall not be reproduced or shared with third parties without IRFTS agreement
64
A°) 3 possible cases
Annex n° 3
Tile’s
alignment over the Top Flashing
(view
wih local cut)
1°) The tile’s
bottom
is tangent with
marking « Limite tuile »
Optimal overlap
respecting the manufacturer recommendation.
2°) The tile
is
too long.
Cut the tile to align the tile’s
bottom
with the marking « Limit tuile ».
(View
with local cut)
Spot the marking "Limite tuile" on the EASY ROOF frame
3°) The tile
is
too short.
The tile must overlap the top flashing
with a minimum of 150mm.
If the « R » dimension » (distance between the marking « Limite tuile » and the tile’s
bottom) is
higher
than 70mm, move up the PV field. In that case the dimension « A » will
be
increased, see page 14.
Dimension "R" 70 mm
MAXI
Move up the PV field
Model “L-1” 60 Cells 6” Portrait
