Sensor Installation
Modline 5
35
best performance. Groupings of accessories are shown in Section 3.10
page 50. Also see Section 3.9.6.1
WJA Water Cooling Requirements
page 45.
When using a WJA – Water Jacket Assembly with air cooling, the use of an APA air
purge is required with Sensors with the DWD. The use of an APA is also required when
viewing large targets over 1000
C (1832 F).
Figure 20: DWD with ESA
1. ESA and APA air purge with clean air provides air purging, and shielding.
2. ESA and APA air purge without air provides a dead air space zone, and shielding.
3. ESA with MFL Flange provides a dead air space zone and shielding.
4. ESA with MFL and AA-3 air purge accessory (not shown) provides air purging and shielding.
See Section 3.12
Other Accessories (Sight Tube, Window, WJ-5 Water Cooling)
references.
3.9
Modline 5 Mounting, Cooling and Air Purging Accessories
3.9.1
UAA – Universal Adapter Accessory Description and Dimensions
The UAA is a circular ring that clamps around the Modline 5 Sensor. A M8 screw tightens the clamp
around the Sensor. Three ¼-20 threaded holes on the bottom flat surface allow fastening the UAA to a
tripod; user designed mounting surface or the RAM – Right Angle Mounting Bracket.
