Sensor Installation
48
Modline 5
Figure 36: BMA Dimensions
Dimensions are in inches and (millimeters). Do not scale.
Use 5/16 inch or M8 mounting Bolts (3 Places).
3.9.8
ESA – Extension Sleeve Adapter Description and Dimensions
This is a special accessory for Sensors with the Dirty Window Detector (DWD) option. The ESA serves
as protection sleeve over the DWD optics and as the mechanical interface between the Sensor and other
Modline 5 accessories. The ESA is used in the following combinations to provide air purging or create
a dead air space zone in front of the Sensor optics to help keep them clean. The combinations also
provide shielding from stray radiation emanating from high temperature targets. The APA air purge,
shown in combinations one and two, provides the best performance. The use of an APA is required for
large targets over 1000
C.
1.
ESA and APA air purge with clean air (air purging and shielding).
2.
ESA and APA air purge without air (dead air space zone and shielding).
3.
ESA with MFL Flange (dead air space zone and shielding)
4.
ESA with MFL and AA-3 air purge accessory (air purging and shielding).
See Section 3.8
for DWD and Section 3.12
Tube, Window, WJ-5 Water Cooling)
, page 60 for AA-3 references.
Bolt mount ARC
