IPG Intertape RSA 3036-SB, Operation Manual

Page: 13 / 93

UDM644-00 RSA3036-SB Manual 13
UM644TW
SET-UP PROCEDURES
Receiving and Handling
The machine is shipped to the customer in a box and fixed to a pallet.

Remove the strapping and the staples at the bottom of the box.

Lift off the box cover and sleeve.

Remove the mounting bolts and nuts, which secure the RSA 3036-SB to the
shipping pallet.

Lift the machine off the pallet and install it on your packaging line.

Remove all tie wraps and other shipping materials.
Note: After unpacking the machine, look for any damage that may have occurred
during shipping. Should the machine be damaged, file a claim with the transport
company and notify your Intertape representative as soon as possible.
Set-up
The Carton Sealer must be installed on a near level ground.
Ensure that the machine is level and firmly on the ground (no rocking). Adjust the leg
height with the four (4) telescopic adjustment legs to accommodate conveyor heights
from 24 to 30 inches.
To adjust the Carton Sealer height, jack up
the machine to give ample room to extend
the legs. Using a 3/4" (19 mm) box end
wrench, loosen the eight (8) 1/2" hex head
bolts. Adjust the legs to the desired
conveyor height and tighten the bolts.
Etched lines on the legs ease leveling.
Figure 9