IPG Intertape RSA 3036-SB, Operation Manual

Page: 16 / 93

UDM644-00 RSA3036-SB Manual 16
UM644TW
The electric motors are protected with an
automatic re-settable overload. This reset
is located in the electrical box in the lower
left quadrant. Push on the blue button to
reset. The current setting should be set at
110% of the FLA of a single motor.
Figure 14
Air Connection
The regulator has a male "quick disconnect" adaptor. Connect clean dry compressed air
to this adapter. The RSA-3036-SB requires a minimum of 9 CFM. at
90 PSI .
To regulate the air pressure, pull on the
green knob located on the side of the
machine. Turn the knob clockwise for
more pressure and counterclockwise for
less. When the air pressure is at
90 PSI ,
push back down on the button until a
"click" is felt to lock it in position. The
thread size is 3/8 NPT.
Figure 15
Note: Should the compressed air be cut for any reason, the Top Tape Head Box will
stop until the compressed air is restored.