IPG Intertape RSA 3036-SB, Operation Manual

Page: 20 / 93

UDM644-00 RSA3036-SB Manual 20
UM644TW
7. The carton will pass through the machine and be taped.
8. When the exit sensor is released the drives will open.
Bottom Only Mode:
This mode is used for sealing the bottom of the carton only. In this mode, the top tape
head box remains up all the time.
1. Ensure that the compressed air is plugged in and at the right pressure, 90 PSI.
2. Turn the control button placed under the start button to "BOTT" (Bottom Only).
3. Press the start button, the drives will start.
4. The Top Tape Head Box will move to its highest position and remain there.
5. Present the carton over the front sensor, up to the steel gate.
6. The drive bases will then close on the carton to carry it through the bottom tape
head.
7. The machine resets when the carton clears the exit sensor.
Clear Mode:
This mode is used to clear a jammed carton. When in this mode the belts moves out and
the Top Tape Head Box up.
1. Ensure that the compressed air is plugged in and at the right pressure, 90 PSI.
2. Turn the control button placed under the start button to "CLEAR" (Clear Jam).
3. Remove jammed carton.
Warning! Ensure that the operator's hands are away from the moving belts of
the side drive base assembly. Do no place hand on the front edge of
the carton while it is entering the machine.
Note: Should any problem occur during processing that requires halting the machine, press the
red "E-Stop" mushroom button.
Note: The machine should never be washed down or subjected to conditions causing
condensation on components.