manualshive.com logo in svg

Iomega 3151100, User Manual, Page: 45 / 60

Share
Download
Iomega 3151100 User Manual Download Page 45

45

Your Ditto 2GB Tape Drive

Your Ditto 2GB Tape Drive

Your Ditto 2GB Tape Drive

Your Ditto 2GB Tape Drive

Your Ditto 2GB Tape Drive

Inserting and Removing Tapes

Grip and insert your tape minicartridge as illustrated below.  Push
past the spring resistance of the drive until the minicartridge snaps
into place, leaving about 3 cm (about 1 in) still outside the drive.
To remove the tape minicartridge from the drive, grip as before and
pull it straight out of the drive.  Do not remove the minicartridge if
the drive activity light is on and blinking.  Remove tapes when not
in use.

Tape Capacity and Compatibility

The Ditto 2GB tape is preformatted for you. The formatted capacity
is 1 GB (giga-bytes).  Compressing your raw data by a 2:1 ratio
(compression ratios depend on data type) allows you to store up to 2
GB of data. Ditto 2GB drives will read and write as shown in the
following table. We recommend using only Ditto 2GB tapes.

Compatible
2GB  Drive(s)

Tape Format

Tape Type

Read

Write

2GB

Ditto 2GB

Ditto 2GB

YES

YES

2GB

Ditto 2GB

Ditto 3.7GB

YES

YES

2GB

QIC-3020 Travan TR-3

YES

NO

2GB

QIC-3020 Wide

3020XLF

YES

NO

2GB

QIC-3020

3020XL

YES

NO

2GB

QIC-80 Travan

TR-1

YES

NO

2GB

QIC-80 Wide

5122

YES

NO

2GB

QIC-80XL

2120XL

YES

NO

2GB

QIC-80

2080 or 2120

YES

NO

Summary of Contents for 3151100





























































Reviews:

No comments