15
Preparing the Computer
Preparing the Computer
Preparing the Computer
Preparing the Computer
Preparing the Computer
1
Remove any CD-ROM disks or floppy disks from
the computer’s drives, turn off the power
switch, and disconnect the power cord.
WARNING:
Always disconnect computer electrical power at the power
source before beginning any computer hardware change.
2
Remove the computer cover.
(Most computers have three or four screws on the rear panel that hold the
cover. Refer to your computer manual if removal is unclear.)
3
Locate a vacant 5
1
/
4
-inch horizontal drive bay.
Remove the plastic cover and, if necessary, the
metal shield.
Metal Shield
Plastic Cover
51/4-inch Bay
Tower View
Metal
Shield
Plastic
Cover
51/4-inch Bay