CloudSync Getting Started
Page 3
1.4 Detailed View
1.4.1 Front LED Indication
Power LED
blue
flashing
power on
data access
OS LED
green
flashing
system ready
system is starting up or shutting down
OS LED
red
flashing
system error or system is shutting down
1.4.2 Ethernet LED Indication
The green LED on the left side of the Ethernet connector indicates the LINK status and data
access, whereas the LED on the right indicates the connection speed.
1.4.3 Reset Button
To reset the administrator’s password and the device settings (e.g. after a firmware update):
1. Press and hold the reset button, turn on the power and wait for 5 seconds.
2. Release the button and the device will reset all settings back to factory default.
Existing SMB & FTP user accounts are preserved.
Default login:
admin/admin
Default IP:
Auto IP
from local DHCP server or 169.254.0.1 without DHCP server
Speed
off
green
orange
10Mbps
100Mbps 1000Mbps
Link
off
green
flashing
no connection
connection established
data access
Power button
USB host port
USB device port
Ethernet port
FW update button
FW update LED
Power receptacle
Reset button
Power/access LED (blue)
Status LED (green)
Status LED (red)
100 % full
75% full
50% full
25% full
