22
MSK-101-POE | Advanced configuration manual v1.1 DEC 2019 | msk-101-poe_advanced-config_en_wo v1.1 | © 2019 Inxpect SpA
On the
Configuration
page it is possible to check
correct calibration considering the detection of a
motion
[A]
and the alarm signal
[B]
.
Wrong calibration. Calibration value too high.
Correct calibration.
3.4.8 Troubleshooting calibration
Problem
Solution
The sensitivity is
inhomogeneous
within the
monitored area
Perform automatic calibration
by areas (see "Perform
automatic calibration by
areas" on the previous page)
The sensitivity
level is
homogeneous
but too high/low
Refine the calibration value
(see "Perform manual
calibration" on the previous
page)
3.5 Set the tolerance level
for animals
3.5.1 Tolerance for animals
The sensor can discriminate between motion by
people and pets or small animals (e.g.: mice,
birds).
The ability to discern is greater in proximity of the
sensor and less at the margins of the field of
vision, see "Examples of the field of vision with
horizontal sensor direction (volumetric)" on
page 10 and "Examples of the field of vision with
vertical sensor direction (barrier)" on page 11.
Furthermore, if the objects to be discerned have
similar dimensions, the capability to discern them
is reduced.
3.5.2 Tolerance level
The tolerance level of the sensor can be
configured. A low tolerance level guarantees a
higher level of security, but simultaneously
increases the risk of false alarms. It is suitable for
scenarios where no motion is allowed in the
monitored area (e.g.: in a museum).
A high tolerance level is suitable for outdoor
installations where the probability of false alarms
caused by animals or other moving objects is very
high.
An intermediate tolerance level ignores motion of
a pet, for example, but correctly signals motion of
people walking.
NOTICE
: a person crawling or kneeling is
comparable to the dimensions of an animal for the
sensor. The tolerance level must be lowered to
detect people who are not standing up.
3.5.3 Set the level
main menu >
Configuration
>
Pet tolerance
level
The tolerance for animals can be set to a value
from 0 to 100.
The maximum tolerance level is the
recommended level to minimize outdoor false
alarms.
3. Installation and use
