Operation
39
5.3 Running State
5.3.1 Power-on initialization
Firstly the system initializes during the inverter power-on, and LED displays “8888”. After
the initialization is completed, the inverter is on stand-by status.
5.3.2 Stand-by
At stop or running status, parameters of multi-status can be displayed. Whether or not to
display this parameter can be chosen through Function Code P7.06 (Running status
display selection ) and P7.07 (Stop status display selection) according to binary bits, the
detailed description of each bit please refer the function code description of P7.06 and
P7.07.
In stop status, there are fourteen parameters which can be chosen to display or not.
They are: reference frequency, DC bus voltage, Input-Output terminal status, open
collector output status, PID setting, PID feedback, AI1 voltage, AI2 voltage, AI3
voltage/current, AI4 voltage, HDI1 frequency, HDI2 frequency, step number of simple
PLC or multi-step speed, length value. Whether or not to display can be determined by
setting the corresponding binary bit of P7.07. Press the
》
/SHIFT to scroll through the
parameters in right order . Press DATA/ENT + QUICK/JOG to scroll through the
parameters in left order.
5.3.3 Operation
In running status, there are twenty one running parameters which can be chosen to
display or not. They are: running frequency, reference frequency, DC bus voltage, output
voltage, output current, rotating speed, output power, output torque, PID setting, PID
feedback, ON-OFF input status, open collector output status, length value, count value,
step number of PLC or multi-step speed, AI1 voltage, AI2 voltage, AI3 voltage/current,
AI4 voltage, HDI1 frequency, HDI2 frequency. Whether or not to display can be
determined by setting the corresponding binary bit of P7.06. Press the
》
/SHIFT to scroll
through the parameters in right order . Press DATA/ENT + QUICK/JOG to scroll through
the parameters in left order.
5.3.4 Fault
In fault status, inverter will display parameters of STOP status besides parameters of
fault status. Press the
》
/SHIFT to scroll through the parameters in right order . Press
DATA/ENT + QUICK/JOG to to scroll through the parameters in left order.
