6
| Optidrive ODP-2ETHEG-IN |
Version 1.10
www.invertekdrives.com
General Information
2
2.3. Connection Ports
The interface connects to the Ethernet IP network and slave drive via the built in connection ports.
Port
Function
P1
Ethernet Port 1
P2
Ethernet Port 2
IOIOI 1
RJ45 Drive Data Connection
IOIOI 2
RJ45 Aux equipment Connection
2.4. Status Indicator LEDs
Status LED
Function
NS
EtherNet/IP Network Status Indicator
MS
MS: EtherNet/IP Network Status Indicator
COMM
COMM: Modbus Communication Indicator ( OPC-2-ETHIG-IN <-> Drive )
ERROR
Modbus Error Indicator (OPC-2-ETHIG-IN <-> Drive )
Network Status Indicator
State
Indication
Steady Off
Not powered, no IP address
Steady Green
Online, one or more connections active
Flashing Green
Online, no connections active
Flashing Red
Connection timeout
Steady Red
Duplicate IP
Flashing Green and Red Self-test
Module Status Indicator
State
Indication
Steady Off
No power
Steady Green
Operating in normal condition
Flashing Green
Drive not configured
Flashing Red
Minor fault - Recoverable fault
Steady Red
Major fault - Unrecoverable fault
Flashing Green / Red Self-test
COMM
State
Indication
Steady Off
Modbus protocol TX/RX inactive
Steady/flashing Yellow Modbus protocol TX/RX active
ERROR
State
Indication
Steady Off
Modbus protocol TX/RX Status OK
Steady Red
Non-recoverable internal fault – Modbus communications circuit fault
Flashing Red
Recoverable Communication fault or configuration error
