INVENTOR V7CI-24WiFiR/U7RS-24, Installation Manual

Page: 16 / 176

ƒ
Page 16
„
 Page 12 
CAUTION
The unit body should align per-
fectly with the hole. Ensure that
the unit and the hole are the
same size before moving on.
Step 2: Hang indoor unit.
1. Use the included paper template to cut a rectangular hole in the ceiling, leaving at least 1m (39”)
on all sides. The hole will be 60x60cm (23.6x23.6”) or 90x90cm (35.4x35.4”) big. Be sure to
mark the areas where ceiling hook holes will be drilled.
Fig. 3.3
545mm / 21.5” (Suspension bolt)
570mm / 22.4”(Body)
647mm / 25.5”(Ceiling opening)
523mm / 20.6”
(Suspension bolt)
570mm / 22.4” (Body)
647mm / 25.5” (Ceiling opening)
Refrigerant piping side
Drain hose side
>1m / 39”
>1m / 39”
>1m / 39”
>1m / 39”
(B)
770mm / 30.3” (Suspension bolt)
830mm / 32.7”(Body)
900mm / 35.4”(Ceiling opening)
950mm / 37.4”(Panel)
950mm / 37.4”(Panel)
670mm / 26.4”
(Suspension bolt)
830mm / 32.7” (Body)
900mm / 35.4” (Ceiling opening)
Refrigerant piping side Drain hose side
Models: V7CRI-12WiFiR, V7CRI-18WiFiR
Models: V7CI-24WiFiR, V7CI-36WiFiR, V7CI-42WiFiR,
V7CI-50WiFiR, V7CI-60WiFiR