Top End
®
Terminator™Series
4 Operation
4.1 Unfolding/Folding the Back
WARNING!
–
After any adjustments, repair or service and before
use, make sure all attaching hardware is tightened
securely. Otherwise injury or damage may occur.
–
ALWAYS perform these procedures in the presence
of an assistant. The position of the footrest, camber
tube, back angle, the tautness of the back upholstery
as well as the user’s condition are directly related to
the wheelchairs stability. Any change to one or any
combination of the five may cause the wheelchair to
decrease in stability. Use extreme caution when using
a new seating position. The addition of anti-tippers
may be required.
–
The position of the footrest, seat angle, back angle,
seating system/upholstery, caster size and position,
rear wheel size and position, use of anti-tippers,
as well as the user condition directly relate to the
stability of the wheelchair. Any change to one or any
combination of the ten may cause the wheelchair to
decrease in stability. EXTREME care must be taken
when changing the stability of the wheelchair.
WARNING!
–
Back MUST be locked securely in place before using
the wheelchair.
Back upholstery removed for clarity.
1.
To unfold the back, lift up on the back posts
A
and pull back
towards the rear of the wheelchair until it locks into place.
2.
To fold the back, pull up on the back release cord and push the
back posts
A
forward toward the front of the wheelchair.
24
1171801-A
