Invacare
®
- STORM
4
MAX
SERVICE MANUAL
93
8.12 Rear wheel suspension
8.12.1 Replacing the rear wheel suspension
WARNING: Danger of crushing!
The mobility device is very heavy. Injury hazard to hands and feet!
•
You should seek help from a second person.
Injury hazard caused by uncontrolled movement of the mobility device!
•
Switch the power supply off (ON/OFF key).
•
Engage the drive.
•
Before raising the vehicle, secure the wheels by blocking them with wedges.
Requirements:
•
5 mm Allen key
•
6 mm Allen key
•
T40 torx wrench
•
13 mm socket spanner
•
19 mm socket spanner
•
blade screwdriver
•
long wooden blocks, min. 14 x 14 x 30 cm
Dismantling the wheel suspension:
•
Remove the rear and the centre battery compartment cover as described in chapters 8.1.1 and
8.1.2.
•
Remove the rear light cover as described in chapter 8.1.4.
•
Pull the motor plug out of the power module.
•
Open the cable clamps and expose the motor cable.
•
Remove the drive wheel as described in chapter 8.10.1.
•
Remove the wheel hub as described in chapter 8.10.3.
•
Remove the splash guard as described in chapter 8.1.5.
•
Remove the motor/transmission unit as described in chapter.
