Invacare
®
- STORM
4
MAX
SERVICE MANUAL
113
9.2
Fitting the headrest
9.2.1
Fitting the headrest to the standard back
Requirements:
•
5 mm Allen key
•
10 mm socket spanner
•
Gripping it at the base, hold the lower section of the headrest mounting (4) with the clamp
block against the handlebar (3).
•
Attach the clamp cover (2.
•
Insert the four Allen screws (1) from above through the boreholes.
•
Fit the four cap nuts (5) to the screws from underneath.
•
Use a 5 mm Allen key and a 10 mm socket spanner to tighten the screws and the cap nuts.
•
Fit the headrest in the guide bar.