SERVICE MANUAL
Invacare
®
- STORM
4
MAX
40
8.1.3
Opening the front panel
Requirements:
•
4 mm Allen key
Dismantling the front cover panel:
•
Remove the seat, as described in chapters 8.14.1 and 8.14.5.
•
Remove the rear and the middle covers, as described in chapter 8.1.1 and 8.1.2.
•
Loosen the two Allen screws (1) – concealed by the motor in the picture – using a 4 mm Allen
key.
•
Pull the motor cable and the guide bushes (2) out of the lateral recesses.
•
Pull the connecting cable to the seat out of the recess (3).
•
First lift the front cover up so that the retaining clips (4) are exposed.
•
Then pull the cover off towards the front.
Refitting the front panel:
•
Refit the parts in reverse order.
•
Make sure that the retaining clips (4) snap securely into the openings of the cover.
•
Now tighten all the screws finger-tight again.
