Invacare
®
- STORM
4
MAX
SERVICE MANUAL
77
8.9
Replacing the front wheel carrier
WARNING: Danger of crushing!
The mobility device is very heavy. Injury hazard to hands and feet!
•
You should seek help from a second person.
Injury hazard caused by uncontrolled movement of the mobility device!
•
Switch the power supply off (ON/OFF key).
•
Engage the drive.
•
Before raising the vehicle, secure the wheels by blocking them with wedges.
Requirements:
•
5 mm Allen key
•
17 mm Allen key
•
blade screwdriver
•
25 Nm torque wrench
•
200 Nm torque wrench
•
long wooden blocks, min. 14 x 14 x 30 cm
Dismantling the front wheel carrier:
•
With the aid of a second person, jack up the mobility aid using several wooden blocks.
•
Use a screwdriver to remove the plastic cap (6).
•
Loosen and remove the Allen screw (2) with a 5 mm Allen key.
•
Loosen and remove the Allen screw (5) with a 17 mm Allen key.
•
Remove the two Nord-Lock lock washers (4).
•
Remove and replace the front wheel carrier (3).