SERVICE MANUAL
Invacare
®
- STORM
4
MAX
68
8.7.5
Replacing headlamp brackets (LED lighting system starting 03/2012)
Requirements:
•
4 mm Allen wrench
•
Open-end wrench 8 mm
Uninstalling the tail light bracket:
•
Loosen the hexagon socket head screw (1) with a 4 mm Allen wrench and remove the
headlight from the bracket.
•
Loosen both of the nuts (2) with an 8 mm open-end wrench and remove the bracket from the
rubber mounting.
•
Replace the bracket.
Installing the headlight bracket:
•
Assemble all parts again in reverse order.
•
Tighten the screws hand-tight.
•
Check all vehicle functions.
•
Perform an approximate adjustment of the headlight using the ratchet plate as a guide. The
final adjustment
