Invacare Soft Tilt, User Manual

Page: 21 / 141

21 IVCNORBE221119
Max. user weight
(provided that the weight of the mattress
does not exceed 20 kg)
165 kg
Max. safe working load weight (including
mattress)
185 kg
9 Technical Data
9.1 Characteristics
9.2 Weights
9.3 Allowed mattress sizes
Mattress height and side rail compatibility
Weights of Soft Tilt components
- End-user laying on flat wing
– End-user laying on a elevated wing
Allowed mattress heights, when the end-user is laying on a up to
12° elevated wing (secondary wing = 1–12°).
Allowed mattress heights, when the end-user is laying on a flat
wing (secondary wing = 0°).
*Must be dismounted when the side rail is collapsed and the
end-user is getting out of the bed.
IMPORTANT!
Depending if the end-user in a side position is laying
on a flat wing (mattress horizontal) OR if the wing
the end-user is laying on is raised up to 12°, different
combinations of mattresses and side rails are required
(see appropriate chart below).
Automatic Operation yes
Max. angle in Manual mode 80°
Max. angle in Automatic mode primary wing = 40°
secondary wing = 12°
Angle values in Automatic
mode
0°–40° (+/- 1° interval)
Time values in Automatic
mode
0, 3, 10–180 min (+/- 10 min
intervals)
Complete (main module and 4 arms) 31 kg
Head arm (1 piece) 3.8 kg
Foot arm (1 piece) 2.6 kg
Main module 18.2 kg
Control Box 2.5 kg
Side rail Mattress height
Ane/ Ane(83/85) 10–14 cm
Ane High / Ane High(83/85) 14–24 cm
Freya/Embla 10-13 cm
Freya / Embla with Height Extender mount-
ed*- extending the height with 6 cm
11–19 cm
Freya / Embla with Height Extender mount-
ed*- extending the height with 10 cm
15-23 cm
Side rail Matteress height
Ane High / Ane High(83/85) 14–18 cm
Freya / Embla with Height Extender
mounted*- extending the height with
6 cm
11–13 cm
Freya / Embla with Height Extender
mounted*- extending the height with
10 cm
15-17 cm
Technical Data
9.4 Environmental conditions
*Must be dismounted when the side rail is collapsed and the
end-user is getting out of the bed.
Be aware that when a bed has been stored under
low temperatures, it must be adjusted to operating
conditions before use.
A castellated mattress is recommended.
Storage and
transportation
Operation
Temperature
-10°C to +50°C +5°C to +40°C
Relative humidity 20% to 75%
Atmospheric pressure
800 hPa to 1060 hPa
Mattress width and length depending on bed
width and side rail
Side rail Allowed mattress
width
Min.
length
Bed
width
Ane (83/85) /
Ane High (83/85) 83–85 cm
200 cm 90 cm
Ane / Ane High / Freya /
Embla /
Freya / Embla with
Height Extender- ex-
tending the height with
6 cm
Freya / Embla with
Height Extender- ex-
tending the height with
10 cm
88-90 cm