Invacare MK6i Series Field Reference Manual Download Page 90

Page: 90 / 134

CALIBRATION

LCD DISPLAY

DESCRIPTION

Sets which actuator operates directly through the controller, not through an
additional actuator module.

•

Allows display icons, programming options and drive lockout settings to match
the chair configuration (i.e., tilt only, tilt and recline, etc.)

•

Set according to this chart

ACC SETTINGS

CONVENTIONAL

SMART

No Actuators

OFF

Tilt Only

TILT

OFF

Tilt - In. Pwr Legs

TILT

OFF

Tilt - Center Mount Legs

LEG

OFF

Tilt and Elevate

ELEVATE

Tilt, Elevate, Center Mount Legs

LEG

ELEVATE

Tilt, Elevate, Ind. Pwr Legs

ELEVATE

Recline Only, Recline Ind. Pwr
Legs

RECLINE

OFF

Recline - Center Mount Leg

LEG

OFF

Tilt Recline

OFF

Tilt Recline CM Leg

LEG

OFF

Tilt/Recline Ind. Pwr Legs

OFF

Tilt/Recline/ELEVATE

ELEV

Tilt/Recline/ELEVATE PCMT

LEG

ELEV

ACC FUNCTION

(ON ALL

WHEELCHAIRS

EXCEPT FDX)

>>OFF

TILT

RECLINE

ELEVATE

LEG

FDX With Conventional
Actuators ONLY - TILT
actuator is assigned to
ACC 1.

TDX Spree ONLY -
ELEVATE is assigned to
ACC 1. TILT is assigned
to ACC 2.

Tilt/Rec/ELEV/Ind. Pwr Legs

ELEV

1141471-L-00

Summary of Contents for MK6i Series







































































































































Search results

Summary of Contents for MK6i Series

Reviews:

Invacare MK6i Series, Field Reference Manual, Page: 90 / 134

Search results

Summary of Contents for MK6i Series

Reviews: