4.18
G-Trac Module
•
G-Trac Description
– G-Trac uses an electronic gyro module and special
controller developed to enhance the tracking and control
capabilities of the chair from very slow speeds to fast
speeds. Side sloped terrain (even slightly), obstacles at only
one wheel or encountered on one side ahead of the other
(such as door thresholds), steps and curbs approached
at an angle, and soft or rough uneven terrain all make it
difficult for power chairs to stay on course without veering
to one side or the other. These situations are especially
challenging for drivers using head controls, switch controls,
Sip-n-Puff systems and alternative joystick controls to
negotiate. G-Trac makes it possible to drive a power chair
in these environments in a more controlled and easier
manner.
– The G-Trac technology can be used with the standard
2–pole and 4–pole motors on many Invacare Powered
Wheel Chairs, including the TDX
®
Spree, TDX SC, TDX
SI, TDX SP, Power Tiger, Storm Torque SP, and Storm
Ranger X G-Trac is an option on the order form, is available
with expandable (4-drive) electronic systems, and is not
available with the Gearless Brushless GB™(GB) motors.
•
G-Trac Installation
– G-Trac can only be installed at the factory.
4.19
M610i Six Channel Controller Module
•
Present on systems with 3 or more actuators.
4.20
Tipsy Module
•
Provides seating position sensor connection.
•
Used with the M610i
1141471-L-00
23